1 - Fed. Std. 141 Method 4044
2 - Fed. Std. Method 4287
3 - Volatile Organic Compounds
4 - Fed. Std. 141 Method 4061
5 - MIL-I-46058C
6 - MIL-I-46058C
7 - ASTM D1 50 65T
8 - ASTM D1 50 65T
9 - Very Easy = Can be easily removed by solvents or burn through.
Easy = Not easily removed by solvents however can be removed by Strippers, burn through or removed mechanically.
Moderate = Must be either mechanically removed or by using special Strippers. N/A = Coating not considered to be rework able.
1063
Alkaline Polyurethane/Water-based coating Stripper. Highly effective, boards must be rinsed thoroughly in DI water after stripping to remove residue.
1063 gel
gel form of 1063, designed for very localized polyurethane removal. Bds must be thoroughly rinsed with DI after stripping to remove residues.
1072
Proprietary, High flash point polyurethane stripping formulation. Highly effective, boards must be rinsed thoroughly in DI water after stripping to remove residues.
1080
Mild, acrylic stripper formulation. Will effectively dissolve most HumiSeal acrylic coatings. Formulated to have a higher flashpoint and lower odor than other strippers.
1080A
Will effectively strip all HumiSeal acrylic coatings, including aged 1B73 and 1R32A-2, for which stripper 1080A is especially recommended.
1090
High flashpoint, low toxicity stripping solution for HumiSeal silicone conformal coatings. Works best in association with mild mechanical action.
All values contained herein are typical values. Please consult the Technical Data Sheet for the specific product to obtain complete information and detailed specification ranges and physical properties
